Structured Cabling
The physical backbone behind every connected system.
Almoosa Security Systems designs, installs, tests and supports structured cabling infrastructure for offices, commercial buildings, warehouses and other properties across Dubai and the UAE.
Solutions can include Cat6 and Cat6A copper cabling, fibre optic backbones, racks, patching, pathways, testing and documentation.
- Cat6 & Cat6A Copper
- Single-Mode & Multi-Mode Fibre
- Racks & Patching
- Testing & Documentation
Structured Cabling Designed Around the Systems It Supports
Cable category, fibre type, pathways, rack capacity and power requirements are planned around the connected systems, distances and expected growth before installation begins.
- 01
Bandwidth & Distance
Copper and fibre are selected according to the required data rate, link distance, connected equipment and expected service life of the infrastructure.
- 02
Pathways & Containment
Cable routes, trays, conduits and containment are coordinated with the building and fit-out so data cabling can be installed, protected and maintained without unnecessary congestion.
- 03
PoE & Connected Devices
Wireless access points, IP cameras, IP phones, access-control devices and other compatible networked devices may receive data and power through the cabling. Not every device, cable run or switch supports the same PoE load, so cable type, run length and network equipment are considered together where Power over Ethernet is required.
- 04
Capacity & Future Growth
Rack space, spare capacity and backbone requirements are considered during design so future additions can be accommodated without rebuilding the physical network.
Structured Cabling Installation & Infrastructure
AMSS delivers structured cabling as a complete physical network layer, from cable routes and terminations to racks, testing, labelling and handover documentation.
- 01
Cat6 & Cat6A Copper Cabling
Copper data cabling for workstations, wireless access points, IP cameras, phones, access-control devices and other supported network endpoints, with category selected according to bandwidth, distance and PoE requirements.
- 02
Fibre Optic Backbones
Single-mode and multi-mode fibre links for building backbones, floor distribution and longer-distance connections where fibre is appropriate for the required capacity and distance.
- 03
Racks, Cabinets & Patching
Network cabinets, patch panels, cable management and patching arranged to keep equipment and connections organised, accessible and practical to maintain.
- 04
Cable Pathways & Management
Cable trays, conduits, containment and routing coordinated with the building layout to protect cabling and maintain appropriate separation and accessibility.
- 05
Testing & Certification
Installed links are tested against the applicable cabling category or system requirements, with test results provided as part of the handover documentation where included in the project scope.
- 06
Labelling & Documentation
Consistent outlet, patch-panel and cable identification, supported by schedules and records that make future maintenance, fault tracing and expansion easier.
Structured Cabling for Different Environments
Cabling requirements vary with the systems, layout and connected devices at each property.
- 01
Offices & Business Centres
Structured copper and fibre cabling for workstations, Wi-Fi, telephony, meeting spaces and other connected office systems.
- 02
Commercial Buildings
Cabling infrastructure for tenant areas, common facilities, network equipment, security systems and building technology.
- 03
Warehouses & Industrial Facilities
Network and data cabling for offices, operational areas, wireless coverage, connected devices and supporting infrastructure.
- 04
Retail & Hospitality
Structured cabling for POS, Wi-Fi, back-office networks, communications, CCTV and other connected systems where applicable.
- 05
Residential & Multi-Unit Properties
Cabling infrastructure for communications, networking, security and connected building services according to project requirements.
- 06
Technology & Server Environments
Copper and fibre connectivity for racks, switches, servers, storage and other network infrastructure.
Structured Cabling FAQs
01Cat6 or Cat6A — which should we use?
The right category depends on required bandwidth, cable length, Power over Ethernet requirements, installation conditions and how long the infrastructure is expected to remain in service. AMSS reviews those factors before recommending the appropriate cabling category.
02When should fibre be used instead of copper?
Fibre is generally considered for backbone links, longer distances, higher-capacity connections and environments where copper is not appropriate for the required link. The fibre type is selected according to the distance, equipment and network design.
03Do you test the installed cabling?
Yes. Installed links can be tested against the applicable cabling category or project requirements, with results and documentation provided according to the agreed project scope.
04Can the same structured cabling support Wi-Fi, CCTV and access control?
Yes, when the cabling is planned to support them. A structured cabling system can provide the physical network connections for data, wireless access points, video surveillance, access control, telephony and other compatible networked systems.
05Can AMSS extend or upgrade existing cabling?
Yes. AMSS can review existing racks, cabling, pathways and test results to determine what can be retained, extended or replaced as part of an upgrade or fit-out.
Planning a new fit-out or upgrading existing cabling?
Tell us the number of outlets and locations, the systems the cabling needs to support and whether copper, fibre, racks or backbone links are required. AMSS can review the site and recommend a practical structured-cabling approach.